In the process of coke production in the past, most of the projects didn't recycle the coking gas. Either the flare head was used for emptying and burning, or it was directly released, which not only caused a serious waste of resources, but also caused great pollution to the environment. In some coking areas of Shanxi, Shaanxi and Inner Mongolia, the air pollution has reached an alarming and intolerable level. How to effectively use the coal gas resources associated with coking is a very important subject for China's sustainable development. It is not only to control environmental pollution, but also to save resources, improve energy efficiency and solve the current power problem The supply of coal is in short supply, so as to maintain the sustainable development of the country's society and economy.

一邊是資源的大量揮霍和環境的急遽惡化，一邊是資源供應的大限即將臨至，為此國務院發展研究已經建議國家將節約資源與環境保護計劃列入基本國策，國務院主持的國家中長期能源發展規劃中也確立“節能優先”的宗旨，要落實這一決策，有效回收利用焦化煤氣是一項必不可少的工作。

The development research center of the State Council has proposed that the state should include the plan of resource conservation and environmental protection into the basic national policy. The national medium and long-term energy development plan presided by the State Council has also established the purpose of "energy conservation priority". It is necessary to implement this decision and effectively recycle coke Gasification of coal gas is an essential work.

焦化煤氣發電目前可以利用的設備主要是傳統的種用鍋爐和蒸汽輪機的技術結合;以氣體為燃料的燃氣內燃機兩種，用戶可以根據項目的實際操作情況和現場條件進行選擇。

At present, the equipment that can be used in coking gas power generation is mainly the combination of traditional seed boiler and steam turbine technology; there are two kinds of gas-fired internal combustion engine, which users can choose according to the actual operation situation and site conditions of the project.

鍋爐+蒸汽輪機：這是一個非常傳統的技術，也是大家比較熟悉的工藝方式，它是采用鍋爐來直接燃燒焦化煤氣，將煤氣的熱能通過鍋爐內的管束把水轉換為蒸汽，利用蒸汽推動蒸汽輪機再驅動發電機發電。係統的主要設備是燃氣燃燒器、鍋爐、化學水係統、給水係統、蒸汽輪機、冷凝器、冷卻塔、發動機變壓器和控製係統，工藝流程比較複雜。它的優點是：對於燃料氣體要求比較低，隻要燃氣燃燒器能夠承受的氣體，一般都可以適應，燃氣隻需要有限的壓力，因而燃氣處理係統投資比較簡單;但缺點是：工藝複雜，建設周期比較長、難以再移動，必須消耗大量的水資源，占地比較多，能源利用率較低。

Boiler + steam turbine: This is a very traditional technology, and it is also a familiar process. It uses the boiler to directly burn the coking gas. The heat energy of the gas is converted into steam through the tube bundle in the boiler, and the steam is used to drive the steam turbine to drive the generator to generate electricity. The main equipment of the system is gas burner, boiler, chemical water system, water supply system, steam turbine, condenser, cooling tower, engine transformer and control system, and the process flow is relatively complex. Its advantages are: relatively low requirements for fuel gas, as long as the gas burner can bear the gas, generally can adapt, gas only needs limited pressure, so the gas treatment system investment is relatively simple; but the disadvantages are: the process is complex, the construction cycle is relatively long, it is difficult to move, must consume a lot of water resources, occupy more land, and have a low energy utilization rate.

焦化氣燃氣內燃機：簡單說就是通過使焦爐氣在機器內部燃燒，將其放出的熱量推動活塞運動，驅動發電機進行發電的過程，相比傳統方式其優點是：運行可靠，結構簡單、緊湊，較小，整套好色先生在线观看可以組裝在一個大型集裝箱中，比之燃煤或燃氣鍋爐占地要少，節省基建投資;設備對水、電消耗較少，燃氣輪機耗水極少，甚至可以不用水，許多機組可以無電源起動，因此適用於缺水、缺電的地區，再者燃氣內燃機具有啟停快，自動化程序高的特點。

Coker gas-fired internal combustion engine: in a simple way, the process of burning coke oven gas inside the machine will drive the piston to move and drive the generator to generate electricity. Compared with the traditional method, its advantages are: reliable operation, simple structure, compact and small size. The whole generator set can be assembled in a large container, which occupies less land than the coal-fired or gas-fired boiler, It can save capital construction investment; the equipment consumes less water and electricity, and the gas turbine consumes little or no water. Many units can start without power supply, so it is suitable for areas with water shortage and power shortage. Moreover, the gas-fired internal combustion engine has the characteristics of fast start-up and stop and high automation procedure.

它的缺點是：燃燒低熱值燃料時，機組功率下降明顯，餘熱回收方式比較複雜，需要頻繁更換機油和火花塞，運維成本較高，排放相對較高，可能需要補充脫硫脫硝設備，增加投資成本，在餘熱不回收的情況下需要冷卻係統。

Its disadvantages are: when burning low calorific value fuel, the unit power decreases significantly, the waste heat recovery method is relatively complex, frequent oil and spark plug replacement are required, the operation and maintenance cost is high, and the emission is relatively high. It may be necessary to supplement the desulfurization and denitrification equipment, increase the investment cost, and need the cooling system when the waste heat is not recovered.