The unstable high-speed operation of the gas engine of the generator set at no load is mostly related to the governor. Generally, most of the working output torque * large medium speed range, because this speed range has good power performance and fuel saving. The judgment and elimination steps of unstable high-speed operation of diesel engine are as follows:; Check whether the speed stabilizing spring is damaged. The speed stabilizing spring not only plays a role in the stability of idle speed, but also has an impact on the stability of high-speed operation. If the constant speed spring is stuck due to wear or softened due to long-term fatigue, it must be repaired or replaced.

檢查怠速副彈簧是否損壞。調速率的大小是靠正確調整調速彈簧來達到額。調速彈簧經長期使用，彈性係數會因疲勞而改變，從而使調速率變大，即使勉強使用也不會得到良好的調速效果，*好予以更換。

Check whether the idle auxiliary spring is damaged. The speed regulation rate is achieved by correctly adjusting the speed regulation spring. After long-term use, the elastic coefficient of the speed regulating spring will change due to fatigue, so as to increase the speed regulating rate. Even if it is reluctantly used, it will not get good speed regulating effect, and it will be replaced.

對RSV型調速器，其高速控製還有怠速副彈簧在起部分作用，設置在背麵中部的怠速副彈簧不僅在怠速時起主導控製作用，而且在高速運轉時還與調速彈簧共同對高速控製起作用，若此彈簧性能不好也會影響發電機無負荷*高轉速的控製。因此怠速彈簧損壞或調整不當會對高速運轉的控製產生不好影響，必須進行調整或更換。

For the RSV governor, the high-speed control also has the idle auxiliary spring playing a part. The idle auxiliary spring set in the middle of the back not only plays a leading control role at idle speed, but also plays a role in high-speed control together with the speed regulating spring at high speed. If the performance of this spring is not good, it will also affect the control of no-load * high speed of the generator. Therefore, the damage or improper adjustment of idle spring will have a bad impact on the control of high-speed operation, which must be adjusted or replaced.